HYW series liquid drive liquid booster
HYW series liquid driven liquid booster is a hydraulic single drive double acting booster pump, which has the advantages of high safety, long seal life, low leakage rate, stable operation, easy maintenance, etc;Hydraulic oil drive, suitable for water, light oil, water lotion and other non corrosive liquids;The maximum output pressure can reach 6400bar;
Product Parameter
Hydraulic Liquid pump of HYW Series | |||||||||
Technical Data Sheet | |||||||||
Model | Ratio | Drive media | Working medium | Inlet pressure range (bar) | Outlet pressure range (MPa) | Working medium inlet size | Working medium outlet size | Drive displacement/stroke | Output displacement/stroke |
HYW-66100 | 20:01 | Hydraulic oil | water, oil | 1-200 | 2-400 | Φ12Hose quick plug | HF6 | 1.65L | 0.0825L |
Hydraulic Liquid pump of HYW Series | |||||||||
Technical Data Sheet | |||||||||
Model | Ratio | Drive media | Working medium | Inlet pressure range (bar) | Outlet pressure range(MPa) | Working medium inlet size | Working medium outlet size | Continuous output displacement (min) | |
0-500MPa | 600MPa | ||||||||
HYW-60040 | 40:01:00 | Hydraulic oil | water, oil | 1-160 | 2-640 | Φ10Hose quick plug | High pressure pipe thread: 3/8 "-24un left-hand rotation | 3 | 4 |
High pressure pipe interface taper: 58 °± 1 ° | |||||||||
HYW series liquid-drive liquid booster is a hydraulic single-drive double-acting booster pump; it has the advantages of high safety, long sealing life, low leakage rate, stable operation and easy maintenance.
Features
1. It is driven by hydraulic oil and is suitable for media such as water, light oil, water emulsion and other non-corrosive liquids;
2. The output pressure can reach up to 6400bar;
3. Easy to maintain, sturdy and durable;
Main features
1. The HYW series high pressure piston is made of ceramics, and the seal is made of special materials;
2. Hydraulic drive allows starting under full load conditions;
3. The HYW600-4 type has higher requirements on the driving medium, it is recommended to use 68# anti-wear hydraulic oil (China recommends using Great Wall brand 68# anti-wear hydraulic oil), and the inlet and outlet of the driving medium must be equipped with a filter device; The temperature should be controlled at 5-50°C, and the maximum pressure of hydraulic oil should not exceed 15.5MPa (the overflow pressure controlled by the overflow valve). Otherwise, the peak pressure of the oil pump may cause damage to the booster and piping.
About pressurized medium
The HYW series has higher requirements on the filtration accuracy of pre-pressurized media, and at least two-stage filtration is recommended. The recommended primary precision is 300μm, and the secondary filter precision is 5μm;
Application scenarios
1. HYW series high-pressure liquid pumps are suitable for test applications requiring ultra-high pressure and large flow under high pressure;
2. The power source required by the cold isostatic press;
3. Used for special bolt tensioning pressure;
4. Self-enhancing application of ultra-high pressure products;
5. Ultra-high pressure water cutting or cleaning;
6. Food pressure sterilization;
7. Special applications of aerospace instruments;